FutureLabGalaxy logoFutureLabGalaxy Physics LabClass 12 · Chapter 3Virtual Lab

Practice Section: All 10 NCERT Chapter 3 Examples

NCERT Class 12 Physics Chapter 3 (Current Electricity) • Comprehensive practice problems with rich, multi-step explanations.

Practice Question 1 (NCERT Example 3.1)
Electron Drift Velocity
(a) Estimate the average drift speed of conduction electrons in a copper wire of cross-sectional area 1.0 × 10⁻⁷ m² carrying a current of 1.5 A. Assume each copper atom contributes one free electron. (Density = 9.0 × 10³ kg/m³, Atomic mass = 63.5 u).
(b) Compare drift speed with (i) thermal speed of copper atoms, and (ii) speed of electric field propagation.
Answer: (a) vd = 1.1 mm/s. (b) Thermal speed (~10² m/s) is much larger, E-field speed (~3 × 10⁸ m/s) is near light speed.
Step 1: Calculate Free Electron Number Density (n)
Given mass of 1 mole of Cu = 63.5 g = 0.0635 kg. Volume of 1 mole = Mass / Density = 0.0635 / 9000 = 7.056 × 10⁻⁶ m³.
Number of atoms per mole = Avogadro's Number NA = 6.022 × 10²³.
Since each atom contributes 1 conduction electron:
n = (6.022 × 10²³) / (7.056 × 10⁻⁶) = 8.53 × 10²⁸ electrons/m³.
Step 2: Apply Current - Drift Speed Formula
Current I = n • e • A • vd
vd = I / (n • e • A)
vd = 1.5 / (8.53 × 10²⁸ × 1.6 × 10⁻¹十九 × 1.0 × 10⁻⁷)
vd = 1.5 / (1.365 × 10³) = 1.1 × 10⁻³ m/s = 1.1 mm/s.
Step 3: Comparative Analysis
(i) Thermal speed vth = √(3 kB T / m) ≈ 10⁵ m/s at 300K. Drift speed is ~10⁸ times smaller than thermal speed.
(ii) Electric field propagates at the speed of electromagnetic waves in copper (~3 × 10⁸ m/s). Drift speed is 10¹¹ times slower!
Practice Question 2 (NCERT Example 3.2)
Toaster Heating Element
An electric toaster uses nichrome. At room temp (27.0 °C), its resistance is 75.3 Ω. Connected to a 230 V supply, the current settles to 2.68 A. Find the steady temperature T (α = 1.70 × 10⁻⁴ °C⁻¹).
Answer: Steady temperature T = 847 °C.
Step 1: Calculate Steady-State Resistance (RT)
Applying Ohm's law at steady state:
RT = V / I = 230 V / 2.68 A = 85.82 Ω.
Step 2: Temperature Coefficient Equation
RT = R₀ [1 + α (T - T₀)]
RT - R₀ = R₀ • α • (T - T₀)
85.82 - 75.3 = 75.3 × (1.70 × 10⁻⁴) × (T - 27)
10.52 = 0.0128 × (T - 27)
T - 27 = 820.3 °C &implies; T = 847.3 °C ≈ 847 °C.
Step 3: Physical Explanation
As the heating element heats up from 27 °C to 847 °C, lattice ion vibrations increase dramatically, raising resistance from 75.3 Ω to 85.82 Ω and causing the current to settle from an initial surge down to 2.68 A.
Practice Question 3 (NCERT Example 3.3)
Platinum Thermometer
The resistance of platinum wire at ice point is 5.00 Ω and at steam point is 5.23 Ω. When inserted in a hot bath, resistance is 5.795 Ω. Calculate bath temperature.
Answer: Bath temperature t = 345.65 °C.
Step 1: Linear Resistance Thermometry Formula
t = [ (Rt - R₀) / (R₁₀₀ - R₀) ] × 100 °C
Step 2: Substitution & Calculation
Given R₀ = 5.00 Ω, R₁₀₀ = 5.23 Ω, Rt = 5.795 Ω.
Rt - R₀ = 5.795 - 5.00 = 0.795 Ω.
R₁₀₀ - R₀ = 5.23 - 5.00 = 0.230 Ω.
t = (0.795 / 0.230) × 100 = 3.4565 × 100 = 345.65 °C.
Practice Question 4 (NCERT Example 3.4)
Carbon Resistor Color Coding
A carbon resistor has four color bands: Yellow, Violet, Brown, Gold. What is its resistance value and tolerance?
Answer: R = 470 Ω ± 5%.
Step 1: Decode Band Colors
First band (Yellow) = 4
Second band (Violet) = 7
Third band (Brown multiplier) = 10¹
Fourth band (Gold tolerance) = ± 5%
Step 2: Calculate Total Resistance
R = 47 × 10¹ Ω = 470 Ω ± 5% (Range: 446.5 Ω to 493.5 Ω).
Practice Question 5 (NCERT Example 3.5)
Resistor Network & Internal Resistance
A network of resistors (four 4 Ω resistors in a combination) is connected to a 10 V battery with internal resistance 1 Ω. Calculate equivalent resistance and total current drawn.
Answer: Equivalent Req = 5 Ω, Total Current I = 2 A.
Step 1: Parallel Branch Reductions
First parallel pair of 4 Ω & 4 Ω: R12 = (4 × 4) / (4 + 4) = 2 Ω.
Second parallel pair of 2 Ω & 2 Ω: R34 = (2 × 2) / (2 + 2) = 1 Ω.
External total resistance Rext = 2 Ω + 1 Ω + 1 Ω = 4 Ω.
Step 2: Total Circuit Resistance & Current
Rtotal = Rext + r = 4 Ω + 1 Ω = 5 Ω.
Total Battery Current I = &mathcal;E / Rtotal = 10 V / 5 Ω = 2.0 A.
Practice Question 6 (NCERT Example 3.6)
Wheatstone Bridge Kirchhoff Current
A Wheatstone bridge has arms AB = 100 Ω, BC = 10 Ω, CD = 5 Ω, DA = 60 Ω, and a 15 Ω galvanometer across BD. Calculate galvanometer current when 10 V is applied across AC.
Answer: Galvanometer current Ig = 4.87 mA.
Step 1: Formulate KVL Loop Equations
Loop ABDA: 100 I₁ + 15 Ig - 60 I₂ = 0 &implies; 20 I₁ + 3 Ig - 12 I₂ = 0
Loop BCDB: 10 (I₁ - Ig) - 5 (I₂ + Ig) - 15 Ig = 0 &implies; 2 I₁ - 6 Ig - I₂ = 0
Loop ADCE: 60 I₂ + 5 (I₂ + Ig) = 10 &implies; 65 I₂ + 5 Ig = 10
Step 2: Matrix Elimination
Solving simultaneous linear system gives Ig = 4.87 × 10⁻³ A = 4.87 mA.
Practice Question 7 (NCERT Example 3.7)
Meter Bridge Null Point
In a meter bridge, the balance point is found at 39.5 cm from end A when Y = 12.5 Ω. Determine resistance X.
Answer: Resistance X = 8.16 Ω.
Step 1: Meter Bridge Ratio Formula
X / Y = l₁ / (100 - l₁)
X = Y • [ l₁ / (100 - l₁) ]
Step 2: Substitution
X = 12.5 × [ 39.5 / (100 - 39.5) ] = 12.5 × (39.5 / 60.5) = 8.16 Ω.
Practice Question 8 (NCERT Example 3.8)
Potentiometer Cell Comparison
A potentiometer wire balances for cell 1 at 1.25 m and cell 2 at 0.75 m. Find the ratio of their EMFs &mathcal;E₁ / &mathcal;E₂.
Answer: Ratio &mathcal;E₁ / &mathcal;E₂ = 5/3 = 1.67.
Step 1: Potentiometer Principle
&mathcal;E ∝ l &implies; &mathcal;E₁ / &mathcal;E₂ = l₁ / l₂
Step 2: Calculation
&mathcal;E₁ / &mathcal;E₂ = 1.25 / 0.75 = 125 / 75 = 5 / 3 = 1.67.
Practice Question 9 (NCERT Example 3.9)
Potentiometer Internal Resistance
A 1.5 V cell has open-circuit balance point at 76.3 cm. When shunted by a 9.5 Ω resistor, the balance point shifts to 64.8 cm. Determine internal resistance r.
Answer: Internal resistance r = 1.68 Ω.
Step 1: Internal Resistance Formula
r = R • [ (l₁ - l₂) / l₂ ]
Step 2: Substitution & Calculation
r = 9.5 × [ (76.3 - 64.8) / 64.8 ] = 9.5 × (11.5 / 64.8) = 1.68 Ω.
Practice Question 10 (NCERT Example 3.10)
Manganin Wire Stability
Why are standard resistance coils made of alloys like manganin or constantan rather than pure metals?
Answer: High resistivity and near-zero temperature coefficient of resistance (α).
Detailed Conceptual Explanation
1. High Resistivity: Allows making compact coils with smaller wire lengths.
2. Near-Zero Temperature Coefficient (α ~ 10⁻⁵ °C⁻¹): Resistance remains virtually unchanged even when current heats up the coil, ensuring measurement accuracy.