Exercise Section: All 10 NCERT Chapter 3 Exercises
NCERT Class 12 Physics Chapter 3 (Current Electricity) • Complete guided exercises with hints, answers, and step-by-step solutions.
The storage battery of a car has an EMF of 12 V . If internal resistance is 0.4 Ω , what is maximum current?
💡 View Hint
Check Answer →
Detailed Solution →
Maximum current occurs when RL = 0 (Imax = &mathcal;E / r).
Answer: Imax = 30 A.
Given Data
Battery EMF &mathcal;E = 12 V, Internal resistance r = 0.4 Ω.
Calculation
For short-circuit (maximum current), external resistance R = 0.
I
max = &mathcal;E / r = 12 V / 0.4 Ω =
30 A .
A battery of EMF 10 V and internal resistance 3 Ω gives 0.5 A. Find resistor R and terminal voltage V.
💡 View Hint
Check Answer →
Detailed Solution →
Total circuit R + r = &mathcal;E / I. V = I • R.
Answer: R = 17 Ω, V = 8.5 V.
Step 1: Find Load Resistance (R)
R + r = &mathcal;E / I &implies; R + 3 = 10 / 0.5 = 20 &implies;
R = 17 Ω .
Step 2: Terminal Voltage (V)
V = I • R = 0.5 × 17 =
8.5 V .
(a) Resistors 1 Ω, 2 Ω, 3 Ω in series. Total resistance? (b) Connected to 12 V battery, find potential drop across each.
💡 View Hint
Check Answer →
Detailed Solution →
Series Req = R₁ + R₂ + R₃. Current I = V / Req .
Answer: (a) 6 Ω. (b) V₁ = 2 V, V₂ = 4 V, V₃ = 6 V.
Step 1: Equivalent Resistance
R
eq = 1 + 2 + 3 =
6 Ω .
Step 2: Voltage Drops
I = 12 / 6 = 2 A.
V₁ = 2 × 1 =
2 V , V₂ = 2 × 2 =
4 V , V₃ = 2 × 3 =
6 V .
(a) Resistors 2 Ω, 4 Ω, 5 Ω in parallel. Total resistance? (b) Connected to 20 V battery, find current through each resistor and total current.
💡 View Hint
Check Answer →
Detailed Solution →
Parallel voltage is 20 V across all. 1/Req = 1/2 + 1/4 + 1/5.
Answer: (a) Req = 20/19 Ω ≈ 1.05 Ω. (b) I₁ = 10 A, I₂ = 5 A, I₃ = 4 A; Itotal = 19 A.
Step 1: Equivalent Parallel Resistance
1/R
eq = 1/2 + 1/4 + 1/5 = (10 + 5 + 4)/20 = 19/20 &implies; R
eq =
20/19 Ω ≈ 1.05 Ω .
Step 2: Branch Currents
I₁ = 20 / 2 =
10 A , I₂ = 20 / 4 =
5 A , I₃ = 20 / 5 =
4 A .
I
total = 10 + 5 + 4 =
19 A .
At room temp (27.0 °C), resistance of heating element is 100 Ω. What is temperature if resistance becomes 117 Ω? (α = 1.70 × 10⁻⁴ °C⁻¹).
💡 View Hint
Check Answer →
Detailed Solution →
RT = R₀ [1 + α (T - T₀)].
Answer: T = 1027 °C.
Calculation
117 - 100 = 100 × (1.70 × 10⁻⁴) × (T - 27)
17 = 0.017 × (T - 27) &implies; T - 27 = 1000 &implies;
T = 1027 °C .
A 15 m long wire has uniform cross-section 6.0 × 10⁻⁷ m² and resistance 5.0 Ω. Calculate material resistivity.
💡 View Hint
Check Answer →
Detailed Solution →
Resistivity ρ = R • A / L.
Answer: ρ = 2.0 × 10⁻⁷ Ω·m.
Calculation
ρ = (5.0 × 6.0 × 10⁻⁷) / 15 =
2.0 × 10⁻⁷ Ω·m .
A silver wire has resistance 2.1 Ω at 27.5 °C and 2.7 Ω at 100 °C. Determine temperature coefficient α.
💡 View Hint
Check Answer →
Detailed Solution →
α = (R₂ - R₁) / [ R₁ • (T₂ - T₁) ].
Answer: α = 0.0039 °C⁻¹.
Calculation
α = (2.7 - 2.1) / [ 2.1 × (100 - 27.5) ] = 0.6 / (2.1 × 72.5) =
0.0039 °C⁻¹ .
Nichrome heating element connected to 230 V draws 3.2 A initially, settling to 2.8 A. If room temp is 27.0 °C, find steady temperature (α = 1.70 × 10⁻⁴ °C⁻¹).
💡 View Hint
Check Answer →
Detailed Solution →
R₀ = 230 / 3.2, RT = 230 / 2.8.
Answer: T = 867.5 °C.
Calculation
R₀ = 71.875 Ω, R
T = 82.14 Ω.
R
T - R₀ = 10.267 Ω &implies; T - 27 = 10.267 / (71.875 × 1.70×10⁻⁴) = 840.5 &implies;
T = 867.5 °C .
Determine current in each branch of a network having 10 V battery with 1 Ω internal resistance in loop with 4 Ω, 2 Ω, 1 Ω branch resistors.
💡 View Hint
Check Answer →
Detailed Solution →
Set up Kirchhoff's loop equations ∑ΔV = 0.
Answer: I₁ = 5/8 A, I₂ = 7/8 A, I₃ = 1.5 A.
Calculation
Applying KVL across independent loops gives
I₁ = 0.625 A, I₂ = 0.875 A, I₃ = 1.5 A .
(a) Meter bridge balance point is 39.5 cm with Y = 12.5 Ω. Find X. (b) Why are thick copper strips used at bridge corners?
💡 View Hint
Check Answer →
Detailed Solution →
X / Y = l₁ / (100 - l₁). Thick copper strips minimize end contact resistance.
Answer: (a) X = 8.16 Ω. (b) To minimize stray contact resistance.
Calculation & Concept
(a) X = 12.5 × (39.5 / 60.5) =
8.16 Ω .
(b) Thick copper strips have very high cross-sectional area, giving negligible resistance to prevent errors in balance length measurements.