FutureLabGalaxy logoFutureLabGalaxy Physics LabClass 12 · Chapter 3Virtual Lab

Demo 7: Wheatstone Bridge & Meter Bridge Experiment

NCERT Class 12 Physics Chapter 3 • Galvanometer null deflection dial, unknown resistance ($X = Y \frac{l}{100-l}$), and 100 cm wire jockey key.

Galvanometer Null Deflection Dial
Balance Length (l)
40.0 cm
Unknown Resistance (X)
6.67 Ω
Bridge State
BALANCED
Experiment Adjusters
Known Resistance Box Y (Ω)10.0 Ω
Jockey Position l (cm)40.0 cm
Meter Bridge Formula
Unknown Resistance:
X = Y • [ l / (100 - l) ]

I_g = 0 at null point l!
📖 Comprehensive Study Guide: Wheatstone Bridge & Potentiometer
NCERT 3.13 & 3.14

1. Wheatstone Bridge Balancing Principle

Network of 4 resistors $R_1, R_2, R_3, R_4$. When galvanometer current $I_g = 0$, bridge is balanced:
R₁ / R₂ = R₃ / R₄
Null-point method eliminates measuring instrument current load errors!

2. Meter Bridge Instrument

Practical application of Wheatstone bridge with $100\\text{ cm}$ wire: $R_x = R \left(\frac{l}{100 - l}\right)$.

3. Potentiometer Ideal Voltmeter Principle

Measures potential without drawing ANY current (infinite resistance!). Potential gradient $K = V/L$.
• EMF Comparison: $\frac{\mathcal{E}_1}{\mathcal{E}_2} = \frac{l_1}{l_2}$.
• Internal Resistance: $r = R \left(\frac{l_1 - l_2}{l_2}\right)$.
Wheatstone Bridge Proof:
At balance, potential at node B equals node D ($V_B = V_D$).
$I_1 R_1 = I_2 R_2$ and $I_1 R_3 = I_2 R_4$. Dividing equations yields $\frac{R_1}{R_3} = \frac{R_2}{R_4} \implies \frac{R_1}{R_2} = \frac{R_3}{R_4}$.
💡 Null-Point Balance Intuition: Potentiometer acts like a balance scale for voltage. By balancing unknown EMF against uniform wire drop, no current bleeds into measurement device.
🚀 Technological Applications: Strain gauge bridge sensors, precision resistance thermometry (RTDs), calibration standards.
⚠️ Common Exam Pitfalls: Potentiometer is MORE ACCURATE than a digital voltmeter because it draws ZERO current at balance point!

📊 Topic Formula & Variable Reference Table

Symbol Physical Quantity SI Unit Key Equation
Bridge Balancing Condition Ratio $\frac{R_1}{R_2} = \frac{R_3}{R_4}$
K Potentiometer Gradient V/m $K = V_{wire} / L$
r_pot Internal Resistance Ohm (Ω) $r = R\left(\frac{l_1-l_2}{l_2}\right)$