FutureLabGalaxy logoFutureLabGalaxy Physics LabClass 12 · Chapter 3Virtual Lab

Demo 4: Resistor Combinations (Series vs Parallel Networks)

NCERT Class 12 Physics Chapter 3 • Equivalent resistance ($R_{\\text{eq}}$), branch current division, and live multimeter circuit probing.

Circuit Current Flow Simulator
Equivalent R (R_eq)
15.00 Ω
Total Current (I)
0.80 A
Circuit Mode
SERIES
Network Config
Circuit Topology
Resistor R₁ (Ω)10.0 Ω
Resistor R₂ (Ω)5.0 Ω
Network Formulas
Series: Req = R₁ + R₂   (Same Current I)

Parallel: 1/Req = 1/R₁ + 1/R₂   (Same Voltage V)
📖 Comprehensive Study Guide: Combination of Resistors & Networks
NCERT 3.6

1. Series Resistors ($R_{series}$)

Current $I$ is constant. Total voltage $V = V_1 + V_2 + \dots$
R_eq = R₁ + R₂ + &dots;
Voltage Divider Rule: $V_1 = V_{total} \left(\frac{R_1}{R_1 + R_2}\right)$.

2. Parallel Resistors ($R_{parallel}$)

Voltage $V$ is constant. Total current $I = I_1 + I_2 + \dots$
1 / R_eq = 1 / R₁ + 1 / R₂ + &dots;
Current Divider Rule: $I_1 = I_{total} \left(\frac{R_2}{R_1 + R_2}\right)$.

3. Infinite Ladder & Symmetry Networks

Symmetrical circuits analyzed by folding along equipotential axes or solving repeating unit quadratic equations.
Parallel Equivalent Proof:
$I = I_1 + I_2 = \frac{V}{R_1} + \frac{V}{R_2} = V \left(\frac{1}{R_1} + \frac{1}{R_2}\right)$.
Since $I = V/R_{eq} \implies \frac{1}{R_{eq}} = \frac{1}{R_1} + \frac{1}{R_2}$.
💡 Pipe Flow Analogy: Series connects pipes end-to-end (increases length $L$, raising resistance). Parallel places pipes side-by-side (increases cross-section $A$, reducing resistance).
🚀 Technological Applications: Precision DAC resistor ladders (R-2R networks), current shunt sensors.
⚠️ Common Exam Pitfalls: Parallel equivalent resistance is ALWAYS smaller than the smallest branch resistor!

📊 Topic Formula & Variable Reference Table

Symbol Physical Quantity SI Unit Key Equation
R_series Series Equivalent Ohm (Ω) $R_{eq} = \sum R_i$
R_parallel Parallel Equivalent Ohm (Ω) $\frac{1}{R_{eq}} = \sum \frac{1}{R_i}$
I_div Current Divider Rule Ampere (A) $I_1 = I \frac{R_2}{R_1 + R_2}$