A complete, rigorous breakdown of the NCERT Class 12 Part 1 Chapter 5 syllabus with clear formulas and physical principles.
1. The Bar Magnet & Magnetic Field Lines
Magnetic phenomena were first noted in ancient times in Magnesia (Greece). When freely suspended, a bar magnet aligns itself in the geographic north-south direction.
Fundamental Properties of Magnetic Field Lines:
- Continuous Closed Loops: Outside the magnet, lines emerge from the North pole and enter the South pole. Inside the magnet, they run continuously from South to North. (Unlike electric field lines which start on $+q$ and terminate on $-q$).
- Direction: The tangent to a field line at any point gives the direction of the magnetic field $\vec{B}$ at that point.
- No Intersection: Two field lines never cross. If they did, the magnetic field at that point would have two different directions, which is physically impossible.
- Field Line Density: Relative closeness of lines indicates the strength of the magnetic field $\vec{B}$.
2. Bar Magnet as an Equivalent Finite Solenoid
Cutting a bar magnet in half produces two smaller complete magnets. This suggests a bar magnet consists of microscopic circulating currents, in exact analogy with a finite current-carrying solenoid.
For a solenoid with $n$ turns per unit length, length $2l$, radius $a$, and current $I$:
At a large distance $r$ ($r \gg a$ and $r \gg l$), the axial and equatorial magnetic fields are:
Notice the exact 2 : 1 ratio between the axial and equatorial field strengths at the same distance.
3. Magnetic Dipole in a Uniform Field (Torque, SHM & Energy)
When a magnetic dipole of moment $\vec{m}$ is placed in a uniform external magnetic field $\vec{B}$:
• Net Force: $\vec{F}_{\text{net}} = 0$ (no translation in uniform field).
• Restoring Torque: $\vec{\tau} = \vec{m} \times \vec{B} \implies \tau = m B \sin\theta$.
• Angular Simple Harmonic Motion: For small deflections $\sin\theta \approx \theta$, the restoring torque gives $\mathcal{I}\frac{d^2\theta}{dt^2} = -mB\theta$. The period of oscillation is:
• Potential Energy: $U(\theta) = -\vec{m}\cdot\vec{B} = -mB\cos\theta$.
- Stable Equilibrium ($\theta = 0^\circ$): $U_{\text{min}} = -mB$, torque $\tau = 0$.
- Unstable Equilibrium ($\theta = 180^\circ$): $U_{\text{max}} = +mB$, torque $\tau = 0$.
- Work required to rotate from $\theta_1$ to $\theta_2$: $W = -mB(\cos\theta_2 - \cos\theta_1)$.
4. Gauss's Law of Magnetism & Terrestrial Magnetic Elements
Gauss's Law for Magnetism: The net magnetic flux through any arbitrary closed surface is always zero:
This fundamental law confirms that magnetic monopoles do not exist; the elementary source of magnetism is always a dipole.
Earth's Magnetic Elements: To completely describe Earth's field at any point, three quantities are needed:
- 1. Magnetic Declination ($D$): Angle between geographic north (meridian) and magnetic north.
- 2. Angle of Dip / Inclination ($I$): Angle that the total magnetic field $\vec{B}_E$ makes with the horizontal plane.
- 3. Horizontal Component ($H_E$): The horizontal projection of $\vec{B}_E$.
5. Magnetisation, Susceptibility & Material Classification
• Magnetisation ($\vec{M}$): Net magnetic moment per unit volume: $\vec{M} = \vec{m}_{\text{net}} / V$.
• Magnetic Intensity ($\vec{H}$): Field produced by external currents: $\vec{H} = \frac{\vec{B}}{\mu_0} - \vec{M} \implies \vec{B} = \mu_0(\vec{H} + \vec{M})$.
• Magnetic Susceptibility ($\chi$): Dimensionless factor $\chi = M/H$. Relative permeability $\mu_r = 1 + \chi$. Total permeability $\mu = \mu_0 \mu_r$.
Classification of Magnetic Substances:
- Diamagnetic ($-1 \le \chi < 0, 0 \le \mu_r < 1$): Weakly repelled by magnetic fields. Net atomic dipole moment is zero; external field induces opposing moments (Lenz's law). Temperature independent. (e.g. Copper, Bismuth, Lead, Superconductors with $\chi = -1$ showing the Meissner Effect).
- Paramagnetic ($0 < \chi < \varepsilon, \mu_r > 1$): Weakly attracted. Atoms possess permanent dipole moments, which align with the field against thermal agitation. Obeys Curie's Law: $M = C\frac{B_0}{T} \implies \chi = \frac{C\mu_0}{T}$. (e.g. Aluminium, Platinum, Oxygen).
- Ferromagnetic ($\chi \gg 1, \mu_r \gg 1000$): Strongly attracted. Dipoles spontaneously align in macroscopic domains ($\sim 1\text{ mm}, 10^{11}\text{ atoms}$). Above the Curie Temperature ($T_c$), domains disintegrate and it becomes paramagnetic following the Curie-Weiss Law: $\chi = \frac{C}{T - T_c}$.
Test and verify the theoretical relationships! Drag the probe compass across the canvas, toggle between Bar Magnet and Solenoid mode, and watch real-time field calculations.
📍 60 FPS HTML5 Vector Field
↔️ 2:1 Axial vs Equatorial Live Ratio
🧭 Draggable Test Compass
⚡ Switch Bar Magnet / Solenoid
🧭 Magnetic Field & Compass Mapping
📊 Live Telemetry
Magnetic Moment (m)
0.40 A·m²
Field at Probe (|B|)
1.25 × 10⁻⁴ T
Axial Field (2m/r³)
6.40 × 10⁻⁵ T
Equatorial Field (m/r³)
3.20 × 10⁻⁵ T
Soft Iron (Electromagnet Core)
High Permeability
- High magnetic permeability $\mu_r$ and high retentivity $B_R$.
- Low coercivity $H_C$: Readily demagnetizes when current stops.
- Narrow hysteresis loop $\implies$ minimal energy loss during AC cycles.
Alnico / Steel (Permanent Magnet)
High Coercivity
- High retentivity so that the permanent magnet remains strong.
- Very high coercivity $H_C$: Magnetization cannot be erased easily.
- Resistant to stray external fields, mechanical shocks, and temperature changes.
Example 5.1
Question: In Fig. 5.4(b), the magnetic needle has magnetic moment $m = 6.7 \times 10^{-2}\text{ A m}^2$ and moment of inertia $\mathcal{I} = 7.5 \times 10^{-6}\text{ kg m}^2$. It performs 10 complete oscillations in $6.70\text{ s}$. What is the magnitude of the magnetic field?
✓ Complete Step-by-Step Solution
1. Time Period of Oscillation ($T$):
$$T = \frac{\text{Total Time}}{\text{Oscillations}} = \frac{6.70\text{ s}}{10} = 0.67\text{ s}$$
2. SHM Formula for Magnetic Dipole:
$$T = 2\pi \sqrt{\frac{\mathcal{I}}{mB}} \implies T^2 = \frac{4\pi^2 \mathcal{I}}{mB} \implies B = \frac{4\pi^2 \mathcal{I}}{m T^2}$$
3. Substitute the values:
$$B = \frac{4 \times (3.1416)^2 \times (7.5 \times 10^{-6}\text{ kg m}^2)}{(6.7 \times 10^{-2}\text{ A m}^2) \times (0.67\text{ s})^2} = \frac{2.96 \times 10^{-4}}{3.008 \times 10^{-2}} \approx 0.01\text{ T} = 100\text{ G}$$
Answer: B = 0.01 T (or 100 Gauss)
Example 5.2
Question: A short bar magnet placed with its axis at $30^\circ$ with an external field of $800\text{ G}$ experiences a torque of $0.016\text{ N m}$.
(a) What is the magnetic moment of the magnet?
(b) What is the work done in moving it from its most stable to most unstable position?
(c) The bar magnet is replaced by a solenoid of cross-sectional area $2 \times 10^{-4}\text{ m}^2$ and $1000$ turns, but of the same magnetic moment. Determine the current flowing through the solenoid.
✓ Complete Step-by-Step Solution
(a) Magnetic moment $m$:
$$\tau = m B \sin\theta \implies 0.016 = m \times (800 \times 10^{-4}\text{ T}) \times \sin 30^\circ$$
$$0.016 = m \times 0.08 \times 0.5 = 0.04 m \implies m = \frac{0.016}{0.04} = 0.40\text{ A m}^2$$
(b) Work done from $\theta_1 = 0^\circ$ to $\theta_2 = 180^\circ$:
$$W = U(180^\circ) - U(0^\circ) = (-mB\cos 180^\circ) - (-mB\cos 0^\circ) = 2mB$$
$$W = 2 \times 0.40 \times 0.08 = 0.064\text{ J}$$
(c) Current in equivalent solenoid:
$$m = N I A \implies 0.40 = 1000 \times I \times (2 \times 10^{-4}) = 0.2 I \implies I = \frac{0.40}{0.2} = 2.0\text{ A}$$
Answers: (a) 0.40 A·m², (b) 0.064 J, (c) 2.0 A
Example 5.4
Question: What is the magnitude of the equatorial and axial fields due to a bar magnet of length $5.0\text{ cm}$ at a distance of $50\text{ cm}$ from its mid-point? The magnetic moment of the bar magnet is $0.40\text{ A m}^2$.
✓ Complete Step-by-Step Solution
Condition: $r = 50\text{ cm} = 0.5\text{ m} \gg l = 2.5\text{ cm}$. Short dipole formulas apply.
Equatorial Field:
$$B_E = \frac{\mu_0}{4\pi}\frac{m}{r^3} = 10^{-7} \times \frac{0.40}{(0.5)^3} = 10^{-7} \times \frac{0.40}{0.125} = 3.2 \times 10^{-7}\text{ T}$$
Axial Field:
$$B_A = \frac{\mu_0}{4\pi}\frac{2m}{r^3} = 2 B_E = 2 \times 3.2 \times 10^{-7} = 6.4 \times 10^{-7}\text{ T}$$
Answers: B_E = 3.2 × 10⁻⁷ T, B_A = 6.4 × 10⁻⁷ T
Example 5.8
Question: The earth's magnetic field at the equator is approximately $0.4\text{ G}$. Estimate the earth's dipole moment ($R_E = 6.4 \times 10^6\text{ m}$).
✓ Complete Step-by-Step Solution
Formula: $B_E = \frac{\mu_0}{4\pi}\frac{m}{R_E^3} \implies m = \frac{B_E \cdot R_E^3}{\mu_0 / 4\pi}$.
Calculation:
$$m = \frac{(4 \times 10^{-5}\text{ T}) \times (6.4 \times 10^6\text{ m})^3}{10^{-7}\text{ T m A}^{-1}} = 4 \times 10^2 \times 2.62144 \times 10^{20} = 1.05 \times 10^{23}\text{ A m}^2$$
Answer: Earth's Dipole Moment m ≈ 1.05 × 10²³ A·m²
Exercise 5.1
Question: Answer the following questions regarding earth's magnetism:
(a) Name the three independent quantities conventionally used to specify the earth's magnetic field.
(b) The angle of dip at a location in southern India is about $18^\circ$. Would you expect a greater or smaller dip angle in Britain?
(c) If you made a map of magnetic field lines at Melbourne in Australia, would the lines seem to go into the ground or come out of the ground?
(d) In which direction would a compass free to move in the vertical plane point to, if located right on the geomagnetic north or south pole?
💡 Click to Show/Hide Hint
Dip angle $I$ increases towards magnetic poles. Lines enter at magnetic North and emerge at magnetic South.
✓ Detailed Solution
(a) The three magnetic elements are: Magnetic Declination ($D$), Angle of Dip ($I$), and Horizontal Component ($H_E$).
(b) Britain is at a much higher northern latitude (closer to the magnetic north pole) than southern India, so the dip angle in Britain will be greater (around $70^\circ$).
(c) Melbourne is in the southern hemisphere, close to the magnetic south pole ($S_m$). Hence, magnetic field lines come out of the ground.
(d) At the magnetic poles, $H_E = 0$. A dip needle free to rotate in the vertical plane will point vertically downwards at the magnetic north pole and vertically upwards at the magnetic south pole.
All Sub-questions Verified Against NCERT Part 1
Exercise 5.3
Question: A short bar magnet placed with its axis at $30^\circ$ with a uniform external magnetic field of $0.25\text{ T}$ experiences a torque of magnitude equal to $4.5 \times 10^{-2}\text{ J}$. What is the magnitude of magnetic moment of the magnet?
💡 Click to Show/Hide Hint
Use $\tau = m B \sin\theta \implies m = \frac{\tau}{B \sin\theta}$.
✓ Detailed Solution
$$\tau = m B \sin 30^\circ \implies 4.5 \times 10^{-2} = m \times 0.25 \times 0.5 = 0.125 m$$
$$m = \frac{4.5 \times 10^{-2}}{0.125} = 0.36\text{ J T}^{-1}\text{ (or A m}^2\text{)}$$
Answer: m = 0.36 J/T (or A·m²)