FutureLabGalaxy logoFutureLabGalaxy Chemistry Labchap6
โœจ Class 11 Chemistry ยท Chapter 6: Thermodynamics

First Law of Thermodynamics & PV Work Engine

Interactive gas piston-cylinder apparatus and real-time P-V indicator diagram comparing reversible vs. irreversible expansion work.

Section 1

๐ŸŽ›๏ธ Interactive P-V Simulator & Thermodynamic Work Calculator

โšก Live First Law Energy & Work Computation
$$\Delta U = q + w \quad | \quad w_{\text{rev}} = -2.303\,nRT\log_{10}\left(\frac{V_2}{V_1}\right) \quad | \quad w_{\text{irrev}} = -P_{\text{ext}}(V_2 - V_1)$$
Process Path Reversible Isothermal Expansion
Work Done by Gas (w) w = โˆ’4014.2 J (โˆ’4.01 kJ)
Heat Exchanged (q) q = +4014.2 J (+4.01 kJ) [Heat absorbed]
Internal Energy Change (ฮ”U = q + w) ฮ”U = (+4.01) + (โˆ’4.01) = 0.00 kJ [Isothermal]
Hysteresis Loss: Reversible yields 3.20 kJ more work than irreversible! โœ…
Thermodynamic Insight: Maximum work is performed when expansion proceeds reversibly through an infinite sequence of infinitesimal equilibrium steps.
Section 2

๐Ÿ“š Fundamental Concepts of the First Law & Work

1. Thermodynamic Systems & Boundaries

A system is that part of the universe in which observations are made, surrounded by remaining universe called surroundings. Systems are classified into:

  • Open System: Exchanges both matter and energy with surroundings (e.g., boiling water in an open beaker).
  • Closed System: Exchanges energy but not matter (e.g., gas enclosed in a sealed piston cylinder).
  • Isolated System: Neither matter nor energy can cross boundaries (e.g., boiling liquid in an ideal insulated Dewar flask).

2. State Functions vs. Path Functions

A state function is a thermodynamic property whose value depends solely on the current state of the system (initial and final states), independent of how that state was reached. Internal energy ($U$), Enthalpy ($H$), Entropy ($S$), and Gibbs energy ($G$) are state functions.

In contrast, heat ($q$) and work ($w$) are path functions because their quantities depend directly on the specific path followed during the transformation.

3. The First Law of Thermodynamics

The First Law is the principle of conservation of energy: "Energy can neither be created nor destroyed; it can only be converted from one form to another."

$$\Delta U = q + w$$

According to IUPAC sign convention:

  • Heat absorbed by the system from surroundings: $q > 0$ (+ve).
  • Heat released by the system to surroundings: $q < 0$ (โˆ’ve).
  • Work done on the system by surroundings (compression): $w > 0$ (+ve).
  • Work done by the system on surroundings (expansion): $w < 0$ (โˆ’ve).
Section 3

๐Ÿ“ Derivations of Expansion Work

1. Irreversible Work against Constant External Pressure

When a gas expands against constant opposing pressure $P_{\text{ext}}$ from $V_1$ to $V_2$:

$$w_{\text{irrev}} = -\int_{V_1}^{V_2} P_{\text{ext}}\,dV = -P_{\text{ext}}(V_2 - V_1)$$

In vacuum (free expansion), $P_{\text{ext}} = 0$, so $w = 0$. Since an ideal gas has no intermolecular forces, isothermal free expansion has $q = 0$ and $\Delta U = 0$.

2. Reversible Isothermal Work of an Ideal Gas

In a reversible expansion, the internal pressure matches the external pressure at every infinitesimal step ($P_{\text{ext}} = P_{\text{int}} - dP$):

$$w_{\text{rev}} = -\int_{V_1}^{V_2} P\,dV = -\int_{V_1}^{V_2} \frac{nRT}{V}\,dV = -nRT\ln\left(\frac{V_2}{V_1}\right) = -2.303\,nRT\log_{10}\left(\frac{V_2}{V_1}\right)$$

Since $P_1V_1 = P_2V_2$ for an isothermal process, this is equivalently:

$$w_{\text{rev}} = -2.303\,nRT\log_{10}\left(\frac{P_1}{P_2}\right)$$

3. Reversible Adiabatic Expansion

Under adiabatic conditions, $q = 0$. Hence $\Delta U = w$. Using $C_v = \frac{dU}{dT}$:

$$w = n C_{v,m}(T_2 - T_1) = \frac{nR(T_2 - T_1)}{\gamma - 1} = \frac{P_2V_2 - P_1V_1}{\gamma - 1}$$
Section 4

โœ๏ธ Solved Numerical Problems

Example Given Conditions Formula Used Calculated Result
NCERT 6.2 (Free Expansion) 2 L gas at 10 atm expands into vacuum to 10 L isothermally. $w = -P_{\text{ext}}\Delta V$ ($P_{\text{ext}} = 0$) $w = 0\text{ J}$, $q = 0\text{ J}$, $\Delta U = 0$
NCERT 6.3 (Irreversible Work) 2 L to 10 L against constant $P_{\text{ext}} = 1\text{ atm}$. $w = -P_{\text{ext}}(V_2 - V_1) \times 101.325$ $w = -810.6\text{ J}$, $q = +810.6\text{ J}$, $\Delta U = 0$
Reversible Expansion 1 mol gas at 300 K expands from 2 L to 10 L. $w = -2.303\,nRT\log(10/2)$ $w = -4014.2\text{ J}$ (โˆ’4.01 kJ), $q = +4.01\text{ kJ}$
Unit Conversion Note: $1\text{ L}\cdot\text{atm} = 101.325\text{ J} = 1.01325 \times 10^2\text{ Pa}\cdot\text{m}^3$. Remember to multiply $L\cdot atm$ by 101.325 when converting to SI Joules!
Section 5

๐ŸŒ Practical Engineering & Natural Systems

The distinction between reversible and irreversible work governs real-world mechanical and biological processes:

  • Internal Combustion Engines: Rapid explosive expansion in car cylinders is highly irreversible, resulting in large thermodynamic friction and lost work converted to thermal dissipation.
  • Aerosol Spray Cans: Rapid adiabatic expansion of compressed propellant causes instantaneous cooling of the nozzle and container ($q = 0 \implies \Delta U = w < 0 \implies T_2 < T_1$).
  • Atmospheric Lapse Rate: Rising air masses in the atmosphere experience lower ambient pressure and expand adiabatically, leading to the adiabatic cooling of air (roughly 6.5ยฐC per kilometer).