FutureLabGalaxy logoFutureLabGalaxy Chemistry Labchap5
🧪 States of Matter · Demo 4 of 6

Real Gases, Compressibility Factor & van der Waals Equation

Analyze how intermolecular attractive forces and non-zero molecular excluded volume create deviations from ideal gas behavior across high pressures and varying temperatures.

1

Interactive Laboratory: Compressibility Factor (Z) & van der Waals Solver

Select Gas:
Operating Temperature (T): 400 K (127°C)
Test Pressure (P): 10 atm
📊 Live van der Waals & Compressibility Factor (Z) Engine
[P + a/V²] [V − b] = RT  |  Z = PV/RT
Selected Gas & van der Waals Parameters CO₂ (a = 3.590 L²·atm/mol², b = 0.0427 L/mol)
Thermodynamic State P = 10 atm, T = 400 K (127°C)
Ideal vs Real Molar Volume Videal = 3.284 L  |  Vreal = 3.215 L
Correction Terms Attraction (a/V²) = 0.347 atm  |  Excluded Vol (b) = 0.0427 L
Compressibility Factor: Z = 0.979 (Z < 1: Attraction Dominates ✅)
Boyle Temperature (TB = a/Rb) TB = 3.590 ÷ (0.0821 × 0.0427) = 1024 K
Physical Insight: At 10 atm and 400 K, attractive intermolecular forces dominate. Real molar volume is lower than ideal volume, so Z < 1.
2

Deviations of Real Gases from Ideal Gas Behavior

The ideal gas equation $PV = nRT$ accurately models gases at low pressures and high temperatures. However, experimental observations by Amagat and Andrews revealed significant departures under conditions of high pressure and low temperature.

The failure of the ideal gas law arises from two flawed postulates of the Kinetic Molecular Theory:

  • Assumption of Zero Molecular Volume: Real gas molecules possess finite, impenetrable hard-core volumes. At high pressures, the volume occupied by the gas molecules themselves ($nb$) represents a substantial fraction of the total container volume.
  • Assumption of Zero Intermolecular Forces: Real molecules experience attractive London dispersion forces and dipole interactions. When a molecule is about to strike the container wall, it is pulled inward by neighboring molecules in the bulk gas, softening the wall impact and reducing observed pressure.
3

The van der Waals Equation of State

In 1873, Johannes Diderik van der Waals introduced two correction factors to account for real gas properties:

$$\left(P + \frac{an^2}{V^2}\right)(V - nb) = nRT$$

For one mole of gas ($n = 1$):

$$\left(P + \frac{a}{V^2}\right)(V - b) = RT$$

Significance and Units of van der Waals Constants

  • Constant $a$ (Pressure Correction / Intermolecular Attraction): $$\text{Unit of } a = \text{atm}\cdot\text{L}^2\cdot\text{mol}^{-2} = \text{bar}\cdot\text{dm}^6\cdot\text{mol}^{-2}$$ Measures the strength of attractive forces between molecules. Highly polarizable or polar gases like $\text{NH}_3$ ($a = 4.17$) and $\text{CO}_2$ ($a = 3.59$) have large $a$ values, whereas small nonpolar gases like $\text{H}_2$ ($a = 0.244$) have small $a$ values.
  • Constant $b$ (Volume Correction / Excluded Volume): $$\text{Unit of } b = \text{L}\cdot\text{mol}^{-1} = \text{dm}^3\cdot\text{mol}^{-1}$$ Represents four times the actual spherical volume of one mole of gas molecules ($b = 4 \times N_A \times \frac{4}{3}\pi r^3$). It accounts for the volume excluded to neighboring molecules due to mutual repulsion.
4

Compressibility Factor (Z) & Pressure Regimes

The deviation of a real gas from ideal behavior is quantitatively represented by the compressibility factor ($Z$):

$$Z = \frac{PV}{nRT} = \frac{V_{\text{real}}}{V_{\text{ideal}}}$$
  • Ideal Gas: $Z = 1$ at all temperatures and pressures.
  • Low Pressure Regime ($Z < 1$): Attractive forces dominate. The gas is more compressible than an ideal gas ($V_{\text{real}} < V_{\text{ideal}}$). As pressure begins to rise, the $a/V^2$ term draws the curve downward into a dip.
  • High Pressure Regime ($Z > 1$): Repulsive forces dominate. Molecules are forced into extreme proximity where excluded volume $b$ dominates. The gas is less compressible than ideal ($V_{\text{real}} > V_{\text{ideal}}$), causing $Z$ to continuously rise above 1.
  • Extremely Light Gases ($\text{H}_2$ and $\text{He}$): Because $a$ is tiny, attractive forces are virtually absent at room temperature; $Z > 1$ at all pressures, rising monotonically.

Boyle Temperature ($T_B$)

The temperature at which a real gas obeys ideal gas behavior over an appreciable pressure range ($Z \approx 1$) is the Boyle Temperature:

$$T_B = \frac{a}{Rb}$$

At $T = T_B$, attractive forces and excluded volume effects cancel each other out over a wide pressure range.

5

Critical Constants & Andrews Isotherms of Carbon Dioxide

Thomas Andrews studied the isotherms of $\text{CO}_2$ and proved that a gas cannot be liquefied at any pressure unless its temperature is reduced below a certain threshold known as the Critical Temperature ($T_c$).

Critical Constant van der Waals Expression Value for $\text{CO}_2$ Physical Significance
Critical Temperature ($T_c$) $$T_c = \frac{8a}{27Rb}$$ $30.98^\circ\text{C}$ ($304.1\text{ K}$) Highest temperature at which a gas can be liquefied purely by pressure.
Critical Pressure ($P_c$) $$P_c = \frac{a}{27b^2}$$ $73.0\text{ atm}$ ($73.9\text{ bar}$) Minimum pressure required to liquefy gas at its critical temperature.
Critical Volume ($V_c$) $$V_c = 3b$$ $0.0956\text{ L/mol}$ ($95.6\text{ cm}^3\text{/mol}$) Molar volume occupied by the gas at $T_c$ and $P_c$.
Critical Compressibility Constant: At the critical point, the theoretical van der Waals compressibility factor is a universal constant for all gases: $$Z_c = \frac{P_c V_c}{R T_c} = \frac{\left(\frac{a}{27b^2}\right)(3b)}{R\left(\frac{8a}{27Rb}\right)} = \frac{3}{8} = 0.375$$