✨ Class 11 Chemistry · Chapter 3: Classification of Elements & Periodicity
NCERT Exercises Q3.1 “ Q3.40
Complete solutions to all NCERT chapter exercises
Exercise Section: All 40 NCERT Chapter 3 Exercises
Class 11 Chemistry Chapter 3: Classification of Elements and Periodicity in Properties • Complete textbook questions with authentic statements, hints, answers, and step-by-step solutions.
Exercise 3.1
Theme of Periodic Table
What is the basic theme of organisation in the periodic table?
💡 Hint: Think about how electron configurations relate to elements with similar chemical and physical properties.
Answer: The basic theme is the classification of elements in terms of their electronic configurations, grouping together elements with similar chemical and physical properties.
Step-by-Step Explanation:
1. The basic theme of organizing elements in the Periodic Table is to classify all known elements into groups and periods based on their electronic configurations.
2. Elements possessing identical or similar outer shell (valence) electron configurations exhibit similar chemical and physical properties.
3. Arranging elements in order of increasing atomic numbers brings out periodic repetition of physical and chemical properties, allowing systematic study of chemical behavior rather than studying each element individually.
Exercise 3.2
Mendeleev's Classification
Which important property did Mendeleev use to classify elements in his periodic table and did he stick to that?
💡 Hint: Consider atomic mass vs chemical properties like oxide/hydride formulas, and notice anomalies like Tellurium and Iodine.
Answer: Mendeleev used atomic mass (atomic weight) as the main property. He did NOT stick to it rigidly when chemical properties dictated placing elements out of strict atomic mass order.
Step 1: Fundamental Property Used
Mendeleev used atomic mass (atomic weight) as the fundamental property to classify elements, stating that "the properties of elements are a periodic function of their atomic masses."
Step 2: Deviations & Strictness
No, he did not stick to atomic mass order rigidly.
Whenever an element's atomic mass placed it in a group with different chemical properties (formulas of hydrides and oxides), he prioritized chemical similarity over atomic mass order. Key Examples:
Tellurium (Te, 127.6) was placed before Iodine (I, 126.9) so that Iodine fell into Group VII with Halogens.
Cobalt (Co, 58.9) was placed before Nickel (Ni, 58.7).
Exercise 3.3
Mendeleev vs Modern Law
What is the basic difference in approach between the Mendeleev's Periodic Law and the Modern Periodic Law?
💡 Hint: Focus on the physical quantity chosen as the periodic function (Atomic Mass vs Atomic Number).
Answer: Mendeleev's Periodic Law is based on atomic mass, whereas the Modern Periodic Law is based on atomic number (nuclear charge/electron configuration).
Comparison of Principles:
Mendeleev's Periodic Law: States that physical and chemical properties of elements are a periodic function of their atomic masses.
Modern Periodic Law: States that physical and chemical properties of elements are a periodic function of their atomic numbers (Z).
Significance of Atomic Number:
Atomic number equals the number of protons and total electrons in a neutral atom, which determines the electronic configuration. Chemical properties depend directly on electron configuration rather than atomic mass.
Exercise 3.4
Quantum Numbers & Period Capacity
On the basis of quantum numbers, justify that the sixth period of the periodic table should have 32 elements.
💡 Hint: For n = 6, list the allowed subshells filled in sequence according to Aufbau principle: 6s, 4f, 5d, 6p.
Answer: For n = 6, the available subshells filled are 6s (1 orbital), 4f (7 orbitals), 5d (5 orbitals), and 6p (3 orbitals), giving 16 orbitals total. 16 × 2 = 32 electrons/elements.
Step 1: Identify Subshells for n = 6
The 6th period corresponds to principal quantum number n = 6.
According to the Aufbau principle, electron filling in the 6th period proceeds in order of increasing orbital energy: 6s → 4f → 5d → 6p.
Step 2: Count Available Orbitals
6s subshell: 1 orbital
4f subshell: 7 orbitals
5d subshell: 5 orbitals
6p subshell: 3 orbitals
Total number of orbitals available = 1 + 7 + 5 + 3 = 16 orbitals.
Step 3: Calculate Capacity
Each orbital can accommodate a maximum of 2 electrons.
Total maximum electrons = 16 orbitals × 2 = 32 electrons.
Since each element corresponds to addition of one electron, the 6th period contains 32 elements.
Exercise 3.5
Periodic Location of Z = 114
In terms of period and group, where will you locate the element with Z = 114?
💡 Hint: Write the electronic configuration relative to Radon [Rn] (Z = 86) and count outer valence electrons.
Answer: Period = 7, Group = 14 (Flerovium, Fl).
Step 1: Write Electronic Configuration
Noble gas core for Z = 114 is Radon [Rn] (Z = 86).
Full configuration: [Rn] 5f14 6d10 7s2 7p2.
Step 2: Determine Period Number
The highest principal quantum number (n) present in the configuration is n = 7.
Therefore, the element belongs to Period 7.
Step 3: Determine Group Number
The element is in the p-block because the last electron enters a 7p orbital.
Group number for p-block elements = 12 + number of valence p electrons = 12 + 2 = Group 14 (Carbon family).
Exercise 3.6
Atomic Number Identification
Write the atomic number of the element present in the third period and seventeenth group of the periodic table.
💡 Hint: Period 3 means valence n = 3. Group 17 means halogen (ns² np⁵).
Answer: Atomic number Z = 17 (Chlorine, Cl).
Step-by-Step Derivation:
1. Period = 3: Valence shell principal quantum number n = 3.
2. Group = 17: Valence p-block configuration is ns2 np5 (since Group = 12 + 5 = 17).
3. Outer configuration for n = 3: 3s2 3p5.
4. Complete electronic configuration: 1s2 2s2 2p6 3s2 3p5 = [Ne] 3s2 3p5.
5. Total electrons = 2 + 8 + 7 = 17.
Thus, atomic number Z = 17 (Chlorine, Cl).
Exercise 3.7
Element Namesakes
Which element do you think would have been named by (i) Lawrence Berkeley Laboratory (ii) Seaborg's group?
💡 Hint: Look up synthetic actinoid/transactinoid elements named after Berkeley and Glenn T. Seaborg.
Answer: (i) Lawrencium (Lr, Z = 103) & Berkelium (Bk, Z = 97) | (ii) Seaborgium (Sg, Z = 106).
Historical Nomenclature:
(i) Lawrence Berkeley Laboratory:Lawrencium (Lr, Z = 103) named in honor of Ernest O. Lawrence (inventor of cyclotron) and Berkelium (Bk, Z = 97) named after the city of Berkeley.
(ii) Seaborg's Group:Seaborgium (Sg, Z = 106) named in honor of American nuclear chemist Glenn T. Seaborg.
Exercise 3.8
Group Similarity Cause
Why do elements in the same group have similar physical and chemical properties?
💡 Hint: What feature of electronic configuration is identical for all members of a vertical column?
Answer: Because elements in the same group have identical outer (valence shell) electronic configurations.
Explanation:
1. Chemical properties of an element depend primarily on the number and distribution of electrons in its outermost (valence) shell.
2. All elements belonging to the same vertical group possess the same valence shell electronic configuration (e.g. Group 1 has ns1, Group 17 has ns2 np5).
3. Having identical valence electrons leads to similar bonding behavior, valencies, and chemical reactivity patterns across the group.
Exercise 3.9
Atomic & Ionic Radii Definitions
What does atomic radius and ionic radius really mean to you?
💡 Hint: Define covalent/metallic radius for neutral atoms and effective sphere of influence for ions in a crystal.
Answer: Atomic radius is half the internuclear distance between bonded identical atoms. Ionic radius is the effective distance from ion nucleus to its electron cloud boundary.
Atomic Radius:
Since electron clouds do not have sharp outer boundaries, atomic radius is defined operationally as half the distance between the nuclei of two covalently bonded identical atoms in a homonuclear diatomic molecule (Covalent Radius) or half the internuclear distance between adjacent metal ions in a metallic crystal lattice (Metallic Radius).
Ionic Radius:
Ionic radius is the effective distance from the nucleus of an ion up to the point where it exerts influence on its electron cloud in an ionic crystal lattice.
Exercise 3.10
Atomic Radius Variation Trends
How do atomic radius vary in a period and in a group? How do you explain the variation?
💡 Hint: Across period: effective nuclear charge increases. Down group: main shell n increases.
Answer: Across a period: atomic radius decreases (higher Z_eff). Down a group: atomic radius increases (new main shells n added).
Across a Period (Left to Right):
Trend: Atomic radius decreases. Explanation: Nuclear charge (Z) increases by 1 for each successive element while electrons enter the same principal shell. The effective nuclear charge ($Z_{\text{eff}}$) increases, pulling the electron cloud tighter toward the nucleus.
Down a Group (Top to Bottom):
Trend: Atomic radius increases. Explanation: A new principal energy shell (n) is added at each step down a group. The inner shells shield outer electrons and increase atomic size, which far outweighs the increase in nuclear charge.
Exercise 3.11
Isoelectronic Species Identification
What do you understand by isoelectronic species? Name a species that will be isoelectronic with each of the following atoms or ions: (i) F- (ii) Ar (iii) Mg2+ (iv) Rb+.
💡 Hint: Isoelectronic species have identical total electron counts. Count electrons for F⁻ (10), Ar (18), Mg²⁺ (10), Rb⁺ (36).
Answer: Isoelectronic species have same number of total electrons. (i) F⁻ (10 e⁻): Na⁺ or Ne | (ii) Ar (18 e⁻): K⁺ or Cl⁻ | (iii) Mg²⁺ (10 e⁻): Na⁺ or F⁻ | (iv) Rb⁺ (36 e⁻): Kr or Sr²⁺.
Definition:
Isoelectronic species are atoms, molecules, or ions that contain the exact same total number of electrons.
Isoelectronic Examples:
(i) F- (9 + 1 = 10 e-): Isoelectronic with Na+, Mg2+, O2-, Ne.
(ii) Ar (18 e-): Isoelectronic with K+, Ca2+, Cl-, S2-.
(iii) Mg2+ (12 - 2 = 10 e-): Isoelectronic with Na+, F-, O2-, Ne.
Consider the following species: N3-, O2-, F-, Na+, Mg2+, Al3+. (a) What is common in them? (b) Arrange them in order of increasing ionic radii.
💡 Hint: All have 10 electrons. Higher nuclear charge Z pulls 10 electrons tighter, giving smaller radius.
Answer: (a) All are isoelectronic species with 10 electrons. (b) Increasing radius: Al³⁺ < Mg²⁺ < Na⁺ < F⁻ < O²⁻ < N³⁻.
Part (a): Common Feature
They are all isoelectronic species, each containing a total of 10 electrons (1s2 2s2 2p6 configuration).
Part (b): Radii Order Explanation
For isoelectronic species, ionic radius decreases as nuclear charge (atomic number Z) increases, because more protons pull the same 10 electrons closer.
Nuclear charges: N (7), O (8), F (9), Na (11), Mg (12), Al (13). Increasing order of ionic radii: Al3+ < Mg2+ < Na+ < F- < O2- < N3-
Exercise 3.13
Cation vs Anion Size Theory
Explain why cations are smaller and anions are larger in radii than their parent atoms?
💡 Hint: Cation loss of e⁻ reduces repulsion/shell. Anion gain of e⁻ increases electron-electron repulsion.
Answer: Cations lose electrons -> higher effective nuclear charge per electron -> smaller size. Anions gain electrons -> greater electron repulsion -> larger size.
Why Cations are Smaller than Parent Atoms:
1. Formation of a cation involves loss of one or more valence electrons, often removing an entire outer shell.
2. The remaining electrons experience a higher effective nuclear charge per electron ($Z_{\text{eff}}$), contracting the electron cloud inward. Result: Radius of cation < radius of parent atom.
Why Anions are Larger than Parent Atoms:
1. Formation of an anion involves gain of one or more electrons.
2. Adding electrons increases mutual electron-electron repulsions in the valence shell while nuclear charge remains constant.
3. The electron cloud expands outward to minimize repulsion. Result: Radius of anion > radius of parent atom.
Exercise 3.14
Terminology: Gaseous & Ground State
What is the significance of the terms — 'isolated gaseous atom' and 'ground state' while defining ionization enthalpy and electron gain enthalpy?
💡 Hint: Eliminates intermolecular/lattice forces and ensures starting from lowest energy level.
Answer: Isolated gaseous atom eliminates external bonding/intermolecular forces. Ground state ensures baseline lowest energy level for standard comparison.
Significance of 'Isolated Gaseous Atom':
In solids or liquids, atoms interact strongly with neighboring atoms through chemical bonds or intermolecular forces. Isolating the atom in the gaseous phase eliminates external interactions, ensuring measured energy represents intrinsic atomic properties.
Significance of 'Ground State':
The ground state represents the state of lowest energy. If an atom were in an excited state, less energy would be needed to remove an electron, yielding non-reproducible, non-standard energy values.
Exercise 3.15
Hydrogen Ionization Enthalpy Calculation
Energy of an electron in the ground state of the hydrogen atom is -2.18 × 10-18 J. Calculate the ionization enthalpy of atomic hydrogen in J mol-1.
💡 Hint: Ionization enthalpy ΔiH = E_infinity - E_1. Multiply by Avogadro's number N_A = 6.022 × 10²³.
Ionization enthalpy per atom is the energy required to remove electron from ground state (n = 1) to infinity (n = ∞):
ΔE = E∞ - E1 = 0 - (-2.18 × 10-18 J) = 2.18 × 10-18 J/atom.
Among the second period elements the actual ionization enthalpies are in the order: Li < B < Be < C < O < N < F < Ne. Explain why: (i) Be has higher ΔiH than B (ii) O has lower ΔiH than N and F?
💡 Hint: (i) Be has stable 2s² configuration vs B (2p¹). (ii) N has half-filled 2p³ stability vs O (2p⁴ electron pairing repulsion).
Answer: (i) Be (2s²) has fully filled stable s-orbital vs B (2p¹). (ii) N (2p³) has half-filled subshell stability; O (2p⁴) has electron pairing repulsion.
Part (i): Why Be has higher ΔiH than B
Be (1s2 2s2): Electron removed comes from a fully filled 2s orbital, which has higher penetration and extra stability.
B (1s2 2s2 2p1): Electron removed comes from a 2p orbital, which is higher in energy and shielded by 2s2 electrons.
Thus, removing a 2p electron from B is easier than removing a 2s electron from Be.
Part (ii): Why O has lower ΔiH than N and F
N (1s2 2s2 2p3): Has an extra-stable half-filled 2p subshell (Hund's rule).
O (1s2 2s2 2p4): One 2p orbital contains paired electrons. Electron-electron repulsion in the doubly occupied 2p orbital makes it easier to remove one electron to reach half-filled stability.
F (1s2 2s2 2p5): Has higher nuclear charge (Z = 9) pulling electrons much more strongly, so ΔiH of F is higher than O.
Exercise 3.17
1st vs 2nd Ionization Enthalpy of Na & Mg
How would you explain the fact that the first ionization enthalpy of sodium is lower than that of magnesium but its second ionization enthalpy is higher than that of magnesium?
💡 Hint: 1st IE: Na [Ne] 3s¹ vs Mg [Ne] 3s². 2nd IE: Na⁺ [Ne] octet vs Mg⁺ [Ne] 3s¹.
Answer: 1st IE: Na (3s¹) lower than Mg (3s²). 2nd IE: Na⁺ has stable noble gas octet [Ne] vs Mg⁺ [Ne]3s¹, making 2nd IE of Na much higher.
First Ionization Enthalpy (ΔiH1):
Na (3s1) has 1 valence electron and lower nuclear charge (Z=11) than Mg (3s2, Z=12). Removing 3s1 from Na yields stable octet Na+, whereas Mg has fully filled 3s2. Thus, ΔiH1(Na) < ΔiH1(Mg).
Second Ionization Enthalpy (ΔiH2):
For 2nd ionization:
Na+: Configuration is 1s2 2s2 2p6 (noble gas Neon core). Removing electron breaks stable octet.
Mg+: Configuration is 1s2 2s2 2p6 3s1. Removing 3s1 electron readily produces stable Mg2+ octet.
Thus, ΔiH2(Na) >> ΔiH2(Mg).
Exercise 3.18
Group Trends in Ionization Enthalpy
What are the various factors due to which the ionization enthalpy of the main group elements tends to decrease down a group?
💡 Hint: Consider atomic size increase and screening effect of inner core shells.
Answer: 1. Increase in atomic size (n). 2. Increase in shielding/screening effect by inner core electrons.
Factors Decreasing Ionization Enthalpy Down a Group:
1. Increase in Atomic Radius: At each successive element down a group, a new main electron shell (n) is added. Valence electrons are located further from the nucleus, weakening electrostatic attraction.
2. Increase in Shielding (Screening) Effect: Additional inner electron shells shield the outer valence electrons from the full positive nuclear charge. Conclusion: The combined effect of larger distance and enhanced inner shell shielding far outweighs the effect of increased nuclear charge, causing ionization enthalpy to decrease down a group.
Exercise 3.19
Group 13 Ionization Enthalpy Anomaly
The first ionization enthalpy values (in kJ mol-1) of group 13 elements are: B (801), Al (577), Ga (579), In (558), Tl (589). How would you explain this deviation from the general trend?
💡 Hint: Analyze poor shielding by 3d electrons in Ga and 4f electrons (lanthanoid contraction) in Tl.
Answer: Al -> Ga: Poor shielding by 3d¹⁰ electrons raises Z_eff on Ga. In -> Tl: Poor shielding by 4f¹⁴ electrons (lanthanoid contraction) raises Z_eff on Tl.
Step-by-Step Breakdown:
B (801) to Al (577): Normal decrease due to increase in atomic size.
Al (577) to Ga (579): Ga contains 10 d-electrons (3d10). d-orbitals offer poor shielding, causing effective nuclear charge ($Z_{\text{eff}}$) on outer 4p electron to increase, making ΔiH of Ga slightly higher than Al.
Ga (579) to In (558): Normal increase in size causes slight decrease in ΔiH.
In (558) to Tl (589): Tl contains 14 f-electrons (4f14). f-orbitals have extremely poor shielding effect (lanthanoid contraction), resulting in a sharp increase in $Z_{\text{eff}}$ on 6p electron and raising ΔiH of Tl above In and Ga.
Exercise 3.20
Electron Gain Enthalpy Pairs
Which of the following pairs of elements would have a more negative electron gain enthalpy? (a) C or Si (b) N or P
💡 Hint: (a) C (2p) vs Si (3p). (b) N (2p) has strong interelectronic repulsion in small 2p subshell vs P (3p).
Answer: (a) C has more negative ΔegH than Si. (b) P has more negative ΔegH than N.
Part (a): C vs Si
Carbon (2p) has higher electronegativity and smaller atomic size than Si (3p). Gaining an electron in C forms a stable 2p3 configuration with significant energy release. Thus, C has a more negative ΔegH than Si.
Part (b): N vs P
N has an extremely compact 2p subshell. Adding an electron to N experiences intense interelectronic repulsion, making its electron gain enthalpy less negative (nearly positive).
In P, the incoming electron enters the larger 3p subshell with much less electron repulsion. Thus, P has a more negative ΔegH than N.
Exercise 3.21
Second Electron Gain Enthalpy
Would you expect the second electron gain enthalpy of O as O- + e- → O2- to be positive, more negative or less negative than the first? Justify your answer.
💡 Hint: Consider electrostatic repulsion between negatively charged O⁻ ion and incoming e⁻.
Answer: Positive! Adding an electron to negatively charged O⁻ experiences strong electrostatic repulsion, requiring energy input.
Explanation:
1. The first electron gain enthalpy of oxygen (O + e- → O-) is negative (-141 kJ mol-1) because energy is released.
2. However, the second electron gain process (O- + e- → O2-) involves adding an electron to an already negatively charged anion (O-).
3. Strong electrostatic repulsion acts between the O- ion and the incoming electron.
4. Energy must be supplied (absorbed) to overcome this electrostatic repulsion and force the electron into the ion. Therefore, the second electron gain enthalpy of oxygen is positive (+780 kJ mol-1).
Exercise 3.22
Electron Gain Enthalpy vs Electronegativity
What is the basic difference between the terms electron gain enthalpy and electronegativity?
💡 Hint: One applies to isolated gaseous atoms (measured property in kJ/mol); the other applies to bonded atoms in molecules (relative unitless scale).
Answer: Electron gain enthalpy is energy change when an isolated gaseous atom accepts an electron (kJ/mol). Electronegativity is relative ability of a bonded atom to attract shared electrons (dimensionless).
Key Differences:
Property
Electron Gain Enthalpy (ΔegH)
Electronegativity (χ)
State
Property of an isolated gaseous atom.
Property of a bonded atom in a molecule.
Nature
Tendency to gain an isolated electron.
Tendency to attract shared electron pair.
Units
Measured in kJ mol-1 or eV.
Dimensionless / unitless (Pauling scale).
Exercise 3.23
Constancy of Electronegativity Statement
How would you respond to the statement that the electronegativity of N on Pauling scale is 3.0 in all the nitrogen compounds?
💡 Hint: Electronegativity is not constant; it changes with oxidation state and hybridization (sp vs sp² vs sp³).
Answer: The statement is INCORRECT. Electronegativity varies with oxidation state, hybridization, and bonding environment.
Response:
The statement is incorrect.
Electronegativity of an element is not a fixed, invariant atomic constant. It varies depending on:
Hybridization state: Electronegativity increases with increase in s-character (sp > sp2 > sp3). Nitrogen in sp hybridization is more electronegative than in sp3.
Oxidation state: Higher oxidation state increases electronegativity (N in NO2 is more electronegative than in NH3).
Nature of attached substituents.
Exercise 3.24
Atomic Radius Change on Ion Formation
Describe the theory associated with the radius of an atom as it (a) gains an electron (b) loses an electron.
💡 Hint: (a) Anion: electron repulsion increases cloud size. (b) Cation: nuclear charge per electron increases, shell lost.
Answer: (a) Gaining electron -> electron repulsions expand cloud -> radius increases. (b) Losing electron -> higher Z_eff contracts cloud -> radius decreases.
Part (a): Gaining an Electron (Anion Formation)
When an atom gains an electron, the total number of electrons increases while nuclear charge (Z) remains constant. Increased electron-electron repulsions force the valence shell to expand. Hence, anion radius > atomic radius.
Part (b): Losing an Electron (Cation Formation)
When an atom loses an electron, electron-electron repulsions decrease and often the outermost principal energy shell is completely lost. Remaining electrons experience higher effective nuclear charge ($Z_{\text{eff}}$), pulling the cloud inward. Hence, cation radius < atomic radius.
Exercise 3.25
Isotopes & Ionization Enthalpy
Would you expect the first ionization enthalpies for two isotopes of the same element to be the same or different? Justify your answer.
💡 Hint: Isotopes have identical Z and electronic configurations; only neutron number in nucleus differs.
Answer: Practically the SAME. Ionization enthalpy depends on nuclear charge Z and electron configuration, which are identical for isotopes.
Explanation:
1. Ionization enthalpy depends on nuclear charge (number of protons Z), atomic radius, and electronic configuration.
2. Isotopes of the same element have the exact same atomic number Z and the same electronic configuration.
3. They differ only in the number of neutrons in the nucleus, which has negligible effect on the electrostatic attraction between nucleus and valence electrons. Therefore, first ionization enthalpies of two isotopes are practically identical.
Exercise 3.26
Metals vs Non-Metals Properties
What are the major differences between metals and non-metals?
Answer: Metals: Low IE, electropositive, basic oxides, good conductors. Non-metals: High IE/electronegativity, acidic oxides, insulators.
Comparison Table:
Property
Metals
Non-Metals
Ionization Enthalpy
Low (lose electrons easily).
High (tend to gain/share electrons).
Nature of Oxides
Form basic oxides (e.g. Na2O).
Form acidic/neutral oxides (e.g. Cl2O7).
Electronegativity
Low (Electropositive).
High (Electronegative).
Conductivity
Good electrical & thermal conductors.
Poor conductors (insulators).
Exercise 3.27
Periodic Table Predictions
Use the periodic table to answer the following questions. (a) Identify an element with five electrons in the outer subshell. (b) Identify an element that would tend to lose two electrons. (c) Identify an element that would tend to gain two electrons. (d) Identify the group having metal, non-metal, liquid as well as gas at room temperature.
💡 Hint: (a) Group 17 (ns² np⁵). (b) Group 2 (ns²). (c) Group 16 (ns² np⁴). (d) Group 17 (Halogens).
Answer: (a) Chlorine (Cl, Group 17) | (b) Magnesium (Mg, Group 2) | (c) Oxygen (O, Group 16) | (d) Group 17 (Halogens: F, Cl gas; Br liquid; At metal/metalloid).
Step-by-Step Identification:
(a) 5 outer subshell electrons (ns2 np5): Group 17 Halogen family, e.g. Chlorine (Cl) or Fluorine (F).
(b) Tendency to lose 2 electrons: Group 2 Alkaline Earth Metals, e.g. Magnesium (Mg) or Calcium (Ca).
(c) Tendency to gain 2 electrons: Group 16 Chalcogens, e.g. Oxygen (O) or Sulphur (S).
(d) Group containing metal, non-metal, liquid & gas:Group 17 (Halogens):
The increasing order of reactivity among group 1 elements is Li < Na < K < Rb < Cs whereas that among group 17 elements is F > Cl > Br > I. Explain.
💡 Hint: Group 1 reactivity depends on electron loss (lower IE down group). Group 17 reactivity depends on electron gain (higher electronegativity up group).
Answer: Group 1 loses electrons (IE decreases down group -> reactivity increases). Group 17 gains electrons (electronegativity increases up group -> reactivity increases).
Group 1 (Alkali Metals):
Reactivity of metals depends on their ability to lose electrons (low ionization enthalpy). Down Group 1, atomic size increases and ionization enthalpy decreases, making electron loss easier. Order of reactivity: Li < Na < K < Rb < Cs.
Group 17 (Halogens):
Reactivity of non-metals depends on their ability to gain electrons (high electronegativity & electron gain enthalpy). Up Group 17, atomic size decreases and electron attraction increases. Order of reactivity: F > Cl > Br > I.
Exercise 3.29
General Outer Configurations of Blocks
Write the general outer electronic configuration of s-, p-, d- and f-block elements.
f-block elements: (n-2)f1-14 (n-1)d0-1 ns2 (n = 6 to 7)
Exercise 3.30
Position Assignment from Configurations
Assign the position of the element having outer electronic configuration: (i) ns2 np4 for n = 3 (ii) (n-1)d2 ns2 for n = 4 (iii) (n-2)f7 (n-1)d1 ns2 for n = 6.
💡 Hint: (i) 3s² 3p⁴ -> Group 16, Period 3 (S). (ii) 3d² 4s² -> Group 4, Period 4 (Ti). (iii) 4f⁷ 5d¹ 6s² -> Group 3, Period 6 (Gd).
Answer: (i) Period 3, Group 16 (Sulfur, S) | (ii) Period 4, Group 4 (Titanium, Ti) | (iii) Period 6, Group 3 (Gadolinium, Gd).
Part (i): n = 3, ns2 np4
Configuration: 3s2 3p4.
Period = 3 | Group = 10 + 2 + 4 = Group 16 (Sulfur, S).
Part (ii): n = 4, (n-1)d2 ns2
Configuration: 3d2 4s2.
Period = 4 | Group = 2 + 2 = Group 4 (Titanium, Ti).
Part (iii): n = 6, (n-2)f7 (n-1)d1 ns2
Configuration: 4f7 5d1 6s2.
Period = 6 | Belongs to f-block (Lanthanoids) → Group 3 (Gadolinium, Gd, Z = 64).
Exercise 3.31
Future Elements Z = 117 & 120
The elements Z = 117 and 120 have not yet been discovered. In which family / group would you place these elements and also give the electronic configuration in each case.
💡 Hint: Z = 117 is [Rn] 5f¹⁴ 6d¹⁰ 7s² 7p⁵ (Group 17). Z = 120 is [Og] 8s² (Group 2).
Answer: Z = 117: Group 17 (Halogens), Period 7, [Rn] 5f¹⁴ 6d¹⁰ 7s² 7p⁵ | Z = 120: Group 2 (Alkaline Earth), Period 8, [Og] 8s².
Element Z = 117 (Tennessine, Ts):
Electronic Configuration: [Rn] 5f14 6d10 7s2 7p5
Period: 7
Group: 12 + 5 = Group 17 (Halogen Family)
Element Z = 120 (Unbinilium, Ubn):
Electronic Configuration: [Og] 8s2 (where Og has Z = 118)
Period: 8
Group:Group 2 (Alkaline Earth Metal Family)
Exercise 3.32
Atomic Number from Position
Write the atomic number of the element present in the third period and 17th group of the periodic table.
💡 Hint: Period 3, Group 17 has configuration [Ne] 3s² 3p⁵.
Answer: Atomic number Z = 17 (Chlorine, Cl).
Derivation:
1. Period = 3 &implies; valence shell n = 3.
2. Group = 17 &implies; p-block valence configuration 3s2 3p5.
3. Inner configuration = Neon core [Ne] (10 electrons).
4. Total atomic number Z = 10 + 2 + 5 = 17 (Chlorine, Cl).
Exercise 3.33
Higher Electron Gain Enthalpy Pairs
Which element from the following pair of elements would have a higher electron gain enthalpy? (a) S or O (b) N or P
💡 Hint: 3p elements (S, P) have larger subshell volume than compact 2p elements (O, N), resulting in less electron-electron repulsion.
Answer: (a) S has higher (more negative) ΔegH than O | (b) P has higher (more negative) ΔegH than N.
Part (a): S vs O
Oxygen (2p) has a small atom size leading to high electron-electron repulsions when an electron is added. Sulfur (3p) has a larger subshell with lower repulsion.
Therefore, Sulfur (S) has a higher (more negative) electron gain enthalpy (-200 kJ mol-1 vs -141 kJ mol-1 for O).
Part (b): N vs P
Nitrogen (2p) has strong electron-electron repulsion due to its compact 2p subshell, making its electron gain enthalpy nearly zero/positive.
Phosphorus (3p) accommodates the incoming electron with much less repulsion.
Therefore, Phosphorus (P) has a higher (more negative) electron gain enthalpy.
Exercise 3.34
IUPAC Names Z = 101 to 110
What would be the IUPAC name and symbol for elements with atomic numbers 101 to 110?
1. Arrangement Principle: Elements are arranged in order of increasing atomic numbers (Z).
2. Periods (7 Horizontal Rows): Period number corresponds to the highest principal quantum number (n) of elements in that period.
3. Groups (18 Vertical Columns): Elements in the same group have identical valence electron configurations and similar chemical properties.
4. Four Blocks (s, p, d, f):
s-block: Groups 1 & 2 (Left side)
p-block: Groups 13 to 18 (Right side)
d-block: Groups 3 to 12 (Transition metals, Center)
Predict the formula of binary compounds formed by the following pairs of elements: (a) Element 113 and fluorine (b) Element 120 and oxygen.
💡 Hint: Z = 113 (Nihonium) is Group 13 (valence 3). Z = 120 (Unbinilium) is Group 2 (valence 2).
Answer: (a) NhF₃ (or EF₃) | (b) UbnO (or EO).
Part (a): Element 113 (Nihonium, Nh) & Fluorine
Element 113 belongs to Group 13 (Boron family). Valence electrons = 3, so its principal valence is 3.
Fluorine (Group 17) has a valence of 1.
Formula of binary fluoride = NhF3 (or EF3).
Part (b): Element 120 (Unbinilium, Ubn) & Oxygen
Element 120 belongs to Group 2 (Alkaline earth metals). Valence = 2.
Oxygen (Group 16) has a valence of 2.
Formula of binary oxide = UbnO (or EO).
Exercise 3.37
MCQ: Period Significance
In the modern periodic table, the period indicates the value of: (a) atomic number (b) atomic mass (c) principal quantum number (d) azimuthal quantum number.
💡 Hint: The period number equals the highest main energy level n being filled.
Answer: (c) principal quantum number
Correct Answer: (c) principal quantum number
In the modern periodic table, the period number of an element corresponds directly to the highest principal quantum number (n) of the shell being filled with electrons.
Exercise 3.38
MCQ: Incorrect Periodic Statement
Which of the following statements is incorrect in relation to the periodic table? (a) The p-block has 6 columns because a maximum of 6 electrons can occupy all the orbitals in a p-shell. (b) d-block has 8 columns because a maximum of 8 electrons can occupy all the orbitals in a d-subshell. (c) Each block contains a number of columns equal to the number of electrons that can occupy that subshell. (d) The block indicates the value of azimuthal quantum number (l) for the last subshell filled.
💡 Hint: A d-subshell has 5 orbitals which hold up to 10 electrons, so d-block has 10 columns, not 8.
Answer: (b) d-block has 8 columns because a maximum of 8 electrons can occupy all the orbitals in a d-subshell.
Correct Answer: (b)
Statement (b) is INCORRECT.
A d-subshell has 5 orbitals ($d_{xy}, d_{yz}, d_{zx}, d_{x^2-y^2}, d_{z^2}$) which can accommodate a maximum of 10 electrons (5 × 2 = 10).
Therefore, the d-block has 10 columns (Groups 3 to 12), not 8 columns.
Exercise 3.39
MCQ: Metallic Character Ordering
Considering the elements B, Al, Mg, and K, the correct order of their metallic character is: (a) B < Al < Mg < K (b) Al < Mg < B < K (c) Mg < Al < K < B (d) K < Mg < Al < B.
💡 Hint: B is metalloid/non-metal. Al is metal in Group 13. Mg is Group 2 metal. K is alkali metal in Group 1 (most metallic).
Answer: (a) B < Al < Mg < K
Correct Answer: (a) B < Al < Mg < K
B: Non-metal/metalloid in Period 2, Group 13 (least metallic).
Al: Metal in Period 3, Group 13.
Mg: Alkaline earth metal in Period 3, Group 2 (more metallic than Al).
K: Alkali metal in Period 4, Group 1 (most metallic, lowest IE).
Increasing order of metallic character: B < Al < Mg < K.
Exercise 3.40
MCQ: Non-Metallic Character Ordering
Considering the elements B, C, N, F, and Si, the correct order of their non-metallic character is: (a) B < C < Si < N < F (b) Si < B < C < N < F (c) F < N < C < B < Si (d) F < N < C < Si < B.
💡 Hint: Non-metallic character increases left to right across a period and decreases top to bottom down a group. Si (below C) is least non-metallic.
Answer: (b) Si < B < C < N < F
Correct Answer: (b) Si < B < C < N < F
Non-metallic character increases across a period (left to right): B < C < N < F.
Non-metallic character decreases down a group: Si (Period 3) is less non-metallic than C (Period 2), and less non-metallic than B.
Increasing order of non-metallic character: Si < B < C < N < F.