💧 Interactive Exercise Widget: Hardness in ppm CaCO₃ Equivalent Calculator
Solve water hardness problems: Select salt type and dissolved mass in $1\text{ L}$ sample of water to calculate parts per million ($\text{ppm}$) of $\text{CaCO}_3$ equivalent:
mg / L
Equivalent CaCO₃ Hardness = 100.00 ppm | Degree of Hardness: Moderately Hard Water
Exercise 9.1
Justify the position of hydrogen in the periodic table on the basis of its electronic configuration.
💡 Helpful Hint (Think Before Revealing Solution):
Compare its 1s¹ configuration with alkali metals (ns¹) and halogens (ns² np⁵, 1 electron short of noble gas).
Answer: Hydrogen has 1s¹ configuration. It resembles alkali metals by losing 1e⁻ (forming H⁺) and halogens by gaining 1e⁻ (forming H⁻, acquiring He configuration 1s²). Because of anomalous properties, it is best placed uniquely at the top.
Explanation / Full Steps:
Resemblance with Alkali Metals: Has 1 valence electron ($1s^1$ vs $ns^1$), forms unipositive ion $\text{H}^+$, forms oxides ($\text{H}_2\text{O}$), halides ($\text{HX}$), and sulphides ($\text{H}_2\text{S}$).
Resemblance with Halogens: Needs 1 electron to complete He noble gas configuration ($1s^2$), forms diatomic molecule $\text{H}_2$, forms hydrides ($\text{NaH}$) similar to halides ($\text{NaCl}$), and possesses high ionization enthalpy ($1312\text{ kJ/mol}$).
Unique Anomalous Nature: $\text{H}^+$ is a bare proton of subatomic radius $\sim 1.5 \times 10^{-3}\text{ pm}$ (orders of magnitude smaller than normal atomic ions $50 - 200\text{ pm}$) and cannot exist free in water, always hydrating to hydronium $\text{H}_3\text{O}^+$. Thus, it occupies a standalone position at the apex of the periodic table.
Exercise 9.2
Write the names of isotopes of hydrogen. What is the mass ratio of these isotopes?
💡 Helpful Hint (Think Before Revealing Solution):
Recall ¹H, ²H (D), and ³H (T) and compare their respective atomic masses.
Answer: Protium (¹H), Deuterium (²H or D), and Tritium (³H or T). The approximate mass ratio is 1 : 2 : 3.
Explanation / Full Steps:
Protium (${}^1\text{H}$): mass = $1.007825\text{ u}$ (Abundance: $99.985\%$)
Deuterium (${}^2\text{H}$ or D): mass = $2.014102\text{ u}$ (Abundance: $0.0156\%$)
Tritium (${}^3\text{H}$ or T): mass = $3.016049\text{ u}$ (Radioactive, $\beta^-$ emitter, $t_{1/2} = 12.33\text{ years}$)
How can the production of dihydrogen, obtained from "coal gasification", be increased?
💡 Helpful Hint (Think Before Revealing Solution):
React the carbon monoxide in syngas with steam using iron chromate catalyst (water-gas shift reaction).
Answer: By the water-gas shift reaction: CO(g) + H2O(g) —[673 K, Fe/Cr catalyst]→ CO2(g) + H2(g). CO2 is then removed by scrubbing with sodium arsenite solution.
The production of dihydrogen is increased by reacting the carbon monoxide of syngas with steam in the presence of an iron chromate catalyst ($\text{Fe}_2\text{O}_3/\text{Cr}_2\text{O}_3$) at $673\text{ K}$:
$$\text{CO(g)} + \text{H}_2\text{O(g)} \xrightarrow[\text{catalyst}]{673\text{ K}} \text{CO}_2\text{(g)} + \text{H}_2\text{(g)}$$
This is known as the water-gas shift reaction. The resulting carbon dioxide is subsequently scrubbed out with aqueous sodium arsenite solution or ethanolamine, isolating pure dihydrogen.
Exercise 9.8
What do you understand by (i) electron-deficient, (ii) electron-precise, and (iii) electron-rich compounds of hydrogen? Provide justification with suitable examples.
💡 Helpful Hint (Think Before Revealing Solution):
Examine whether the number of valence electrons is less than, equal to, or greater than that required for standard octet Lewis structures.
Answer: (i) Electron-deficient: B2H6 (Group 13, Lewis acids); (ii) Electron-precise: CH4 (Group 14, octet satisfied); (iii) Electron-rich: NH3, H2O, HF (Groups 15-17, contain lone pairs, Lewis bases).
Explanation / Full Steps:
(i) Electron-deficient: Molecules having fewer electrons than required to write standard 2c-2e Lewis octets (e.g. $\text{B}_2\text{H}_6$). Group 13 elements form them; they act as Lewis acids (electron pair acceptors).
(ii) Electron-precise: Molecules possessing the exact required number of electrons to form octet covalent bonds (e.g. $\text{CH}_4, \text{SiH}_4$). Formed by Group 14 elements with regular tetrahedral geometry.
(iii) Electron-rich: Molecules possessing excess electrons localized as non-bonding lone pairs (e.g. $\text{NH}_3$ has 1 pair, $\text{H}_2\text{O}$ has 2 pairs, $\text{HF}$ has 3 pairs). Formed by Groups 15–17; behave as Lewis bases and form intermolecular hydrogen bonds.
Exercise 9.14
Among NH3, H2O and HF, which would you expect to have highest magnitude of hydrogen bonding and why?
💡 Helpful Hint (Think Before Revealing Solution):
Consider the electronegativity difference, the number of lone pairs, and the number of hydrogen bonding sites per molecule.
Answer: Water (H2O) has the highest magnitude of hydrogen bonding per molecule (forming 4 H-bonds per molecule in 3D tetrahedral network), even though F has higher electronegativity.
Explanation / Full Steps:
Fluorine has the highest Pauling electronegativity (4.0), so each individual $\text{H}-\text{F}\cdots\text{H}$ hydrogen bond is the strongest among the three.
However, each $\text{HF}$ molecule possesses only 1 hydrogen atom and 3 lone pairs (stoichiometrically hydrogen-starved), allowing it to form only 2 hydrogen bonds per molecule on average (linear chains).
In water ($\text{H}_2\text{O}$), oxygen has exactly 2 lone pairs and 2 hydrogen atoms, enabling each $\text{H}_2\text{O}$ molecule to participate in 4 hydrogen bonds in a three-dimensional open tetrahedral network.
Hence, the overall collective magnitude and cohesive energy of hydrogen bonding is maximum in $\text{H}_2\text{O}$, explaining its highest boiling point ($373\text{ K}$ vs $293\text{ K}$ for $\text{HF}$ and $240\text{ K}$ for $\text{NH}_3$).
Exercise 9.22
What causes the temporary and permanent hardness of water?
💡 Helpful Hint (Think Before Revealing Solution):
Temporary hardness is caused by hydrogen carbonates; permanent hardness is caused by chlorides and sulphates.
Answer: Temporary hardness is caused by dissolved magnesium and calcium hydrogen carbonates, Mg(HCO3)2 and Ca(HCO3)2. Permanent hardness is caused by dissolved chlorides and sulphates of calcium and magnesium (CaCl2, MgCl2, CaSO4, MgSO4).
Explanation / Full Steps:
Temporary Hardness: Presence of soluble calcium and magnesium hydrogen carbonates, $\text{Ca(HCO}_3)_2$ and $\text{Mg(HCO}_3)_2$. Easily decomposed on heating to insoluble carbonates or hydroxides.
Permanent Hardness: Presence of soluble chlorides and sulphates of calcium and magnesium ($\text{CaCl}_2, \text{MgCl}_2, \text{CaSO}_4, \text{MgSO}_4$). Soluble salts that cannot be precipitated by simple thermal boiling.
Exercise 9.24
Write chemical reactions to show the amphoteric nature of water.
💡 Helpful Hint (Think Before Revealing Solution):
Show water acting as an acid with NH3 (base) and acting as a base with H2S or HCl (acid).
Answer: Water acts as an acid with NH3: H2O(l) + NH3(aq) ⇌ OH⁻(aq) + NH4⁺(aq); water acts as a base with H2S: H2O(l) + H2S(aq) ⇌ H3O⁺(aq) + HS⁻(aq).
Explanation / Full Steps:
As a Brønsted-Lowry Acid (Proton Donor): Donates a proton to ammonia:
$$\text{H}_2\text{O(l)} + \text{NH}_3\text{(aq)} \rightleftharpoons \text{NH}_4^+\text{(aq)} + \text{OH}^-\text{(aq)}$$
As a Brønsted-Lowry Base (Proton Acceptor): Accepts a proton from hydrogen sulfide:
$$\text{H}_2\text{O(l)} + \text{H}_2\text{S(aq)} \rightleftharpoons \text{H}_3\text{O}^+\text{(aq)} + \text{HS}^-\text{(aq)}$$
(i) Oxidising in Acidic: $2\text{Fe}^{2+}\text{(aq)} + 2\text{H}^+\text{(aq)} + \text{H}_2\text{O}_2\text{(aq)} \to 2\text{Fe}^{3+}\text{(aq)} + 2\text{H}_2\text{O(l)}$ ($\text{Fe}^{2+}$ is oxidized to $\text{Fe}^{3+}$; oxygen in $\text{H}_2\text{O}_2$ is reduced from $-1$ to $-2$).
(ii) Oxidising in Alkaline: $2\text{Fe}^{2+} + \text{H}_2\text{O}_2 + 2\text{OH}^- \to 2\text{Fe}^{3+} + 4\text{OH}^-$.
(iii) Reducing in Acidic: $2\text{MnO}_4^-\text{(aq)} + 6\text{H}^+\text{(aq)} + 5\text{H}_2\text{O}_2\text{(aq)} \to 2\text{Mn}^{2+}\text{(aq)} + 8\text{H}_2\text{O(l)} + 5\text{O}_2\text{(g)}$ ($\text{Mn}^{7+}$ is reduced to $\text{Mn}^{2+}$; oxygen in $\text{H}_2\text{O}_2$ is oxidized from $-1$ to $0$).